FAQ Table of Contents

  1. General Questions 
    1. What is the OnePrint SE ? 
    2. What Hosts can be served by the OnePrint SE ? 
    3. The OnePrint SE can send the converted data to printers connected by ... 
    4. How can the OnePrint SE be configured ? 
    5. How can I monitor the OnePrint SE ? 
    6. What do I need in order to install the OnePrint SE ? 
  2. SNA Communication Questions 
    1. What are the SNA definition in the M/F and the OnePrint SE needed in order configure the OnePrint SE as an SNA attached printer ? 
    2. What are the IBM printers emulated by OnePrint SE ? 
    3. What is the best page printer emulation I should select and why ? 
    4. How do I customize a 3174 to be the upstream gateway for the OnePrint SE ? 
    5. How do I configure a FEP to be the upstream gateway for the OnePrint SE ? 
    6. How do I configure an OS/2 CM/2 (or compatible) to be the upstream gateway for the OnePrint SE ? 
    7. How do I configure a 3172 to be the upstream gateway for the OnePrint SE ? 
    8. What is the BIND command appearing in the OnePrint SE's history file "Ready for printing. BIND type is - 1" ?
    9. What is "-WARNING!- [M082] Host communication status : 505" ?. what does it mean ? 
    10. I Installed the OnePrint SE and the message in the history log file is 505 and 510 intermittently, what is the problem ? 
    11. I Installed the OnePrint SE and got a 510 message in the history log file, but can not send a printout, there is no BIND command, what is the problem ?
  3.  IP Communication Questions 
    1. What parameters do I need in order to configure the OnePrint SE in an IP network ? 
    2. What IP printing protocols are supported by the OnePrint SE ? 
    3. What parameters do I need in order to configure the OnePrint SE to print to JetDirect configured as an LPD server ? 
    4. What parameters do I need in order to configure the OnePrint SE to print to AXIS LPD server ? 
    5. What parameters do I need in order to configure the OnePrint SE to print to MarkNet configured as an LPD server ? 
    6. What parameters do I need in order to configure the OnePrint SE to print to OS/2 configured as an LPD server ? 
    7. What parameters do I need in order to configure the OnePrint SE to print to a UNIX system configured as an LPD server ? 
    8. What parameters do I need in order to configure the OnePrint SE to print to WINDOWS NT configured as an LPD server ? 
    9. What parameters do I need in order to configure the OnePrint SE to print to WINDOWS NT configured as an SMB/IP server ? 
    10. What parameters do I need in order to configure the OnePrint SE to print to WINDOWS 95 configured as an SMB/IP server? 
    11. What parameters do I need in order to configure the OnePrint SE to print to WINDOWS FOR WORKGROUP configured as an SMB/IP server ? 
    12. What parameters do I need in order to configure the OnePrint SE to print to OS/2 LAN SERVER configured as an SMB/IP server? 
    13. What is the PPD/PPR (Encapsulated IPDS) protocol ? 
    14. What parameters do I need in order to configure the OnePrint SE to print to INTERMATE print server configured as a PPD/PPR server ? 
    15. What parameters do I need in order to configure the OnePrint SE to accept a PPD/PPR data stream ? 
    16. What parameters do I need in order to configure the AS/400 and PSF/400 to send PPD/PPR data stream to the OnePrint SE ? 
    17. What parameters do I need in order to configure the M/F PSF Version 2.2 to send PPD/PPR data stream to the OnePrint SE ? 
    18. What parameters do I need in order to configure the OS/2 and PSF/2 to send PPD/PPR data stream to the OnePrint SE ? 
    19. What parameters do I need in order to configure the RS6000 and PSF6000 to send PPD/PPR data stream to the OnePrint SE ? 
    20. How can I check the IP connection between the OnePrint SE and another IP station ?
  4. IPDS DATA stream Questions 
    1. What is an IPDS data stream ? 
    2. What parameters do I need in order to configure the OnePrint SE to print IPDS data stream ? 
    3. What IPDS printers are emulated by the OnePrint SE ? 
    4. What parameters do I need in order to configure the PSF to send data to the OnePrint SE ? 
    5. Does the OnePrint SE accept and hold PSF resources ? 
    6. What is the preferred IBM printer emulation I should configure in the OnePrint SE and why ? 
    7. What parameters do I need in order to configure the OnePrint SE to print DUPLEX ? 
    8. What parameters do I need in order to configure the OnePrint SE to print to several Trays ? 
    9. What is OnePrint SE's "scale to fit IPDS" feature ? 
    10. What is OnePrint SE's "slice" feature ? 

Integrated Print Solutions, LC
1701 North Collins Blvd.
Suite 140
Richardson, TX 75080

Main 972-769-1900
FAX 972-769-2800
Toll Free
1-800-873-0900